The SMALLRIG Universal Phone Holder Mount review centers on a compact clamp for mounting a smartphone on a camera or tripod, with adjustable positioning and a cold shoe for an accessory.
Its broad phone-width range and both portrait and landscape support make it a practical option for mobile video, interviews, and streaming setups.
SMALLRIG Phone Holder Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A flexible camera or tripod mount for creators who want adjustable phone framing and a top cold shoe for a light or microphone.
- Fits smartphones 57–88 mm wide, subject to the fit of the phone and any case.
- Supports portrait and landscape orientation, with a secure lock when rotated 90 degrees.
- Two rotary joints offer up to 180 degrees of adjustment.
- A 1/4-inch-20 threaded hole and cold shoe at the bottom allow mounting on compatible cameras or tripods.
Pros
- Works with a wide range of smartphone widths.
- Supports both portrait and landscape framing.
Consider before buying
- The phone must measure between 57 and 88 mm wide, so check the fit with its case before buying.
- The 500 g maximum load calls for care when combining the phone with mounted accessories.
Read the full review summary
The 4382 combines a phone clamp with two rotary joints, a bottom 1/4-inch-20 threaded hole, and a cold shoe on top.
That arrangement lets you attach it to compatible camera or tripod hardware while keeping a mounting point available for a microphone or light.
Additional threaded holes support SMALLRIG power bank holders, so the mount can fit into a more built-out phone rig.
It is best suited to creators who want to frame a phone in more than one orientation and make small angle adjustments without changing the whole support.
The 57–88 mm width range covers many smartphones, but buyers should check their phone’s width with its case fitted.
The mount weighs 73 g and has a 500 g stated load capacity; the package includes the phone holder only.
The buying factors
SMALLRIG Phone Holder Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Phone compatibility range
The 57–88 mm width range accommodates a broad span of phone sizes, though buyers should check the fit with a case attached.
Orientation flexibility
The clamp supports portrait and landscape use, and its two rotary joints provide up to 180 degrees of adjustment.
Mounting options
A bottom 1/4-inch-20 thread and cold shoe support common camera and tripod mounting arrangements.
Accessory expansion
The top cold shoe and spaced threaded holes provide useful attachment points for compatible accessories.
Portability
At 73 g, the holder adds little weight to a compact phone rig.
Rig load suitability
The 500 g load capacity is a clear limit to consider when adding a phone and accessories.
Key Features and Specifications of SMALLRIG Phone Holder
- Fits smartphones 57–88 mm wide, subject to the fit of the phone and any case.
- Supports portrait and landscape orientation, with a secure lock when rotated 90 degrees.
- Two rotary joints offer up to 180 degrees of adjustment.
- A 1/4-inch-20 threaded hole and cold shoe at the bottom allow mounting on compatible cameras or tripods.
- A cold shoe on top provides a mounting point for a microphone or light.
- Spaced threaded holes are designed for SMALLRIG power bank holders, including IDs 2336 and 2790.
- The holder weighs 73 g and has a maximum load capacity of 500 g; one phone holder is included.
Pros and Cons of SMALLRIG Phone Holder
Pros
- Works with a wide range of smartphone widths.
- Supports both portrait and landscape framing.
- Two rotary joints make angle adjustments more flexible.
- Combines camera or tripod mounting with a top cold shoe for an accessory.
- Lightweight at 73 g.
Consider before buying
- The phone must measure between 57 and 88 mm wide, so check the fit with its case before buying.
- The 500 g maximum load calls for care when combining the phone with mounted accessories.
- The package includes the holder only, so a compatible camera, tripod, phone, and any desired accessories need to be supplied separately.
Who Should Buy SMALLRIG Phone Holder?
Good fit
Consider the SMALLRIG Universal Phone Holder Mount 4382 if you want one clamp for a phone-based camera or tripod setup and expect to switch between portrait and landscape framing.
The two rotary joints provide additional positioning flexibility, while the bottom mounting points let you integrate it with compatible support equipment.
It also makes sense for a compact rig that needs a cold shoe for a microphone or light.
Before choosing it, measure your phone with its case and account for the combined weight of the phone and any accessories against the 500 g load limit.
Who should skip it
Skip this mount if your phone falls outside the 57–88 mm width range or your intended rig exceeds its 500 g maximum load.
If you need a complete filming setup in one package, note that the included item is the holder alone.
How the SMALLRIG Phone Holder fits into a mobile rig
Phone fit and orientation changes
The 57–88 mm width range is the first practical check. A phone that fits without a case may sit differently with a case installed, so measure the full width of the configuration you plan to use.
Once clamped, the holder supports portrait and landscape positioning and locks when rotated 90 degrees, which helps when a shoot calls for changing frame orientation.
Positioning and mounting points
Two rotary joints allow up to 180 degrees of adjustment, giving you ways to change the phone’s angle while it remains on its support.
A 1/4-inch-20 threaded hole and a cold shoe at the bottom provide mounting options for compatible cameras or tripods. Check that your existing support uses one of these interfaces and that the resulting position works for your framing.
Accessory planning and load
The top cold shoe is intended for an accessory such as a microphone or light, while the spaced threaded holes are designed for compatible SMALLRIG power bank holders.
These connections can make a phone rig more adaptable, but the overall combination still needs to stay within the 500 g maximum load. Consider the weight of the phone and attached gear together before building around the clamp.
What comes in the package
The package contains one phone holder. That keeps the purchase focused on the mounting piece, but it means you should already have—or plan to obtain—the phone, camera or tripod, and any accessories needed for your intended setup.
Alternatives to SMALLRIG Phone Holder
Cell Phone Camera Mounts alternative

700+ ratings
Read Amazon ReviewsSMALLRIG Magnetic Metal Phone Mount 5156
Choose the 4382 if you want a clamp that accommodates phones by width.
The 5156 is a more relevant fit if you use a compatible MagSafe iPhone and prefer magnetic attachment; consider its noted possibility of detachment from external impacts when deciding whether that setup suits your use.
- The Magnetic Metal Phone Mount 5156 is designed for iPhone models with MagSafe functionality and uses a magnetic mounting approach.
- It also provides dual rotating shafts, a bottom 1/4-inch-20 thread and cold shoe, threaded accessory points, and a detachable top plate.
- Its stated load capacity is 500 g, and the package includes an Allen wrench.
- The Universal Phone Holder Mount 4382 uses a width-adjustable clamp for phones measuring 57–88 mm.
Is SMALLRIG Phone Holder Worth It?
The SMALLRIG Universal Phone Holder Mount 4382 is worth considering for creators who need a lightweight phone clamp with portrait and landscape support, adjustable joints, and useful mounting points for a camera or tripod rig.
Its accessory options add flexibility without making the holder itself complicated.
Check phone width with the case installed and keep the full rig within the 500 g limit.
If those conditions fit your setup, the 4382 offers a focused mounting solution; if you use a compatible MagSafe iPhone and want magnetic attachment, the 5156 may suit that preference better.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A flexible camera or tripod mount for creators who want adjustable phone framing and a top cold shoe for a light or microphone.
- Fits smartphones 57–88 mm wide, subject to the fit of the phone and any case.
- Supports portrait and landscape orientation, with a secure lock when rotated 90 degrees.
- Two rotary joints offer up to 180 degrees of adjustment.
- A 1/4-inch-20 threaded hole and cold shoe at the bottom allow mounting on compatible cameras or tripods.